All Articles
Aged Care Technology

Website shown on a desktop monitor, laptop, tablet and phone

Digital transformation in aged care is usually described as buying software. In practice, most providers already own plenty of it: a clinical system, rostering, finance, a maintenance tool, perhaps a separate program in the kitchen. The harder work is making those systems share information, so that something recorded once reaches every team that needs it, in a form they can use, with the right protections around it.

The cost of adding one system at a time

Most care homes added technology department by department, each purchase solving a real problem at the time. Years later, the same resident detail lives in three or four places, and nobody is quite sure which copy is current.

The kitchen shows how this plays out. At admission, a nurse records a resident’s diet, texture level and allergies in the clinical system. The catering team needs that same information, but often receives it as a printout, an email or a note at handover, and someone then types it into a diet list or onto a whiteboard. Every time a speech pathologist changes a texture level, the cycle repeats.

Double entry costs time, but the bigger risk is copies drifting apart. The Aged Care Quality and Safety Commission’s information management guide lists the result plainly: decisions that compromise an older person’s safety because data is out of date, inaccurate or incomplete.

What digital transformation in aged care should deliver

A useful test for any change to your systems is whether it moves you closer to four outcomes:

  • Entered once. Each piece of information has one place where it is recorded and owned.
  • Used everywhere it is needed. Other teams receive it without retyping it.
  • Protected. Access is controlled, and you know where the data is held.
  • Actually used. Staff work from the system, not from a parallel paper list.

Under the strengthened Aged Care Quality Standards, in force since the Aged Care Act 2024 commenced on 1 November 2025, these are closer to obligations than aspirations. Outcome 2.7 requires information recorded about a person to be accurate and current, and Outcome 3.3 requires a system that communicates critical information to the workers delivering care in a timely way.

One source of truth, from clinical to catering

It is tempting to look for one program that runs everything. Our founder, an aged care chef, has long made the point that this is like asking one manager to run finance, rosters, maintenance, lifestyle and the kitchen. Each department uses the same information differently. A nurse needs a resident’s diet as part of a care plan. A chef needs it as a production number, a texture level against a menu item and an allergen flag on a tray ticket.

So the practical goal is usually a set of specialist systems connected to each other, with an agreed system of record for each type of information. For dietary needs, that is normally the clinical system, because care staff are the ones who assess and update it. The kitchen’s software then works from that record instead of keeping its own version.

This is how clinical integrations with HDS are designed. HDS integrates with most major clinical care platforms, so a dietary change recorded by care staff can flow through to the resident’s profile in HDS without being typed in twice. Once a change reaches HDS, it shows on every kitchen report and list that includes that resident. Each integration is set up with the provider and their clinical system vendor.

Before connecting anything, map who records what. Write down, for each type of resident information (diet, texture, allergies, preferences, likes and dislikes), where it is entered, who can change it and which teams read it. The gaps in that map are usually where errors have been getting in.

Data standards and interoperability

Connecting systems one by one is slow when every vendor stores data differently, which is why interoperability (systems exchanging information in agreed formats) sits at the centre of national policy.

The Department of Health, Disability and Ageing’s Aged Care Data and Digital Strategy 2024 to 2029 sets the direction. It describes work to digitise, modernise, automate and better connect aged care, and notes that clear system standards and specifications will support secure integration with government systems.
For clinical software specifically, the Australian Digital Health Agency and the Department released the Aged Care Clinical Information System (ACCIS) Standards in August 2024. They are recommended minimum software requirements for clinical information systems and electronic medication management systems in residential aged care, aimed at better information sharing with hospitals, GPs and pharmacies.

For hotel services teams, the takeaway is practical: when you review or replace a clinical system, ask how it shares data with the other software in the home, including catering, and how that fits with the standards above. Our guide to choosing aged care software has a fuller list of questions for vendors.

Governance and security

Every connection is another route for personal information to travel, so integration needs governance alongside it.

Under the Privacy Act 1988, Australian Privacy Principle 11 requires organisations to take reasonable steps to protect personal information from misuse, interference and loss, and from unauthorised access, modification or disclosure. That responsibility stays with the provider when a supplier holds the data. If a breach is likely to cause serious harm, the Notifiable Data Breaches scheme requires the affected people and the OAIC to be notified.

Good governance for a connected set of systems usually covers:

  • a named owner for each system and each data flow between them
  • role-based access, reviewed when staff join, move or leave
  • a record of which suppliers hold resident data, where it is hosted and what certification they hold
  • an incident plan that names who decides whether a breach is notifiable

Security also has to stay workable. If a menu change needs three people’s sign-off, staff will find a way around the system, often on paper. Decide which information genuinely needs tight control (diet and allergy changes, for example) and which day-to-day tasks staff should be free to do themselves.

At HDS, our information security management system is certified to ISO/IEC 27001, and staff sign in with individual logins. Our data security page explains how resident information is hosted and protected.

Leading the change with staff

Systems only transform anything if people use them, and failed rollouts tend to share a few familiar causes.

The demo is not the day-to-day. The person running a software demonstration knows it inside out. The cook on a Sunday shift, or an agency worker on their first day, does not. Judge a system by how quickly a new staff member can find what they need.

A manual is not training. User guides are for looking up a feature you have forgotten. Plan hands-on training for each role, and a way to train the next intake of staff without starting over.

Fit the software to your procedures. Staff routines and approved procedures should not have to bend around a system. Configuration should follow the way your homes work, with changes to process made deliberately, not by accident.

Check after go-live. Once a system has been running for a while, ask the people using it what is working, and walk the kitchen and the nurses’ station. If you find a laminated diet list on the fridge or a handwritten temperature log, the old system is still running alongside the new one, and that is worth knowing early. Our article on going paperless in aged care covers that shift in more detail.

Involve hotel services, catering and care staff from the start, because they know where information currently goes missing. For a wider look at what is changing across the sector, see our overview of aged care technology today.

A sensible order of work

  1. Map the information each team records and reads, and where it is duplicated.
  2. Agree a system of record for each type of information.
  3. Check which of your systems can already connect, and against which standards.
  4. Set governance: owners, access, suppliers and incident response.
  5. Roll out with role-based training, then review with the people using it.

Connecting your kitchen to the rest of the home

If your catering team still works from copies of information held somewhere else, our team can show you how HDS works alongside your clinical system, and how dietary changes reach the kitchen. You can book a personalised demo to talk it through with your own homes and workflows in mind.

Written by

HDS Team

Book a Personalised Demo for Your Organisation

Our team will take you through HDS with your sites, menus and workflows in mind, and answer any questions your organisation has along the way.

Request a Personalised Demo

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Let us know which solutions you would like to see and how your sites currently operate.