All Articles
Food Safety Resources

A food safety audit in an aged care kitchen checks three things: that your food safety program is written down, that your team follows it, and that your records prove it. Businesses serving food to aged care residents must have a food safety program under Standard 3.3.1 of the Food Standards Code, and the audit is how that program is tested against what happens in the kitchen.

Most audits are won or lost in the weeks before the auditor arrives. This guide covers who audits aged care kitchens, what auditors typically look at, the gaps that come up again and again, and a checklist you can work through with your team.

Who carries out a food safety audit, and how often

There is no single national audit schedule. Food Standards Australia New Zealand (FSANZ) sets the requirement for a food safety program, but it tells businesses to check state and territory requirements with their council or health department. A few examples show how much the arrangements differ:

Victoria, Tasmania, the ACT and the Northern Territory run their own arrangements as well. Your auditor or local council is the final word on frequency, scope and what counts as an acceptable record in your state.

A food safety audit is also separate from assessment by the Aged Care Quality and Safety Commission. The strengthened Aged Care Quality Standards started on 1 November 2025, and Standard 6 covers food and nutrition. The same kitchen records often support both, but they are different processes with different assessors.

What auditors typically look at

The auditor’s starting point is your own food safety program. They read what it says you do, then look for evidence that you do it. The NSW Food Authority lists the support programs a vulnerable persons business should document: calibration, cleaning and sanitising, internal audit, food recall, maintenance, pest control, product identification and labelling, and staff training. Other states use similar building blocks, though the detail varies.

Area What the auditor typically asks to see
The food safety program A current, site-specific program that matches your menu, equipment and service style today
Temperature records Receival, fridge, freezer and cool room, cooking, cooling, reheating and hot holding logs, complete and signed
Corrective actions What staff did when a reading or check was out of limits, and who followed it up
Cleaning and sanitising Cleaning schedules signed off for every shift, including weekends and public holidays
Pest control Pest inspection reports and evidence that any findings were acted on
Suppliers and receiving An approved supplier list (NSW asks for one to be kept for audit) and receival checks
Training and supervision Training records for every food handler, including casual and agency staff
Calibration and maintenance Thermometer and probe calibration records, and repairs to equipment that affects food safety

Temperature records usually get the closest look, because they show whether potentially hazardous food was kept out of the danger zone. If you want a refresher on the limits themselves, our guide to the temperature danger zone in aged care kitchens walks through each stage from delivery to the bedside.

Auditors also watch the kitchen working. A gap between what the records say and what staff actually do can be raised on its own, so the program and the daily routine need to tell the same story.

Common gaps in aged care kitchens

Most findings in an aged care kitchen are not dramatic. They come from small lapses that build up over weeks, usually on the shifts with the fewest experienced staff. These are the ones worth checking first:

  • Readings that look too tidy. A column of identical fridge temperatures, or a whole shift’s entries in the same pen, suggests the log was filled in after the fact.
  • Out-of-range readings with no follow-up. The reading is recorded, but nothing shows what happened to the food or the equipment.
  • Unsigned cleaning schedules. Weekday sheets are complete, while weekends and public holidays have gaps.
  • A program that no longer matches the kitchen. New menus, a new blast chiller, a change to tray service or more texture-modified meals, with no update to the written program.
  • Equipment that is hard to clean. The NSW Food Authority notes that contamination of blenders and mixers has come up during audits because they are difficult to clean, which matters in kitchens preparing pureed and minced meals.
  • Missing calibration records. The probe is in daily use, but nobody can show when it was last checked.
  • Training records with holes. Permanent staff are covered, while casuals, agency cooks and new starters are not.
  • Records spread across folders and sites. Everything exists somewhere, but pulling it together takes days.

Older residents have a higher risk of foodborne illness and serious complications, which is why vulnerable persons services are held to a written program in the first place. Our article on why older residents are more vulnerable to foodborne illness covers that side in more detail.

Food safety audit readiness checklist

Work through this with your head chef, catering manager or food safety supervisor. Adjust it to your own program, because your auditor will assess you against that, not against a generic list.

Four to six weeks out

  • [ ] Read the food safety program end to end and confirm it reflects current menus, equipment, suppliers and service areas
  • [ ] Check the date of the last program review and record any changes made since
  • [ ] Confirm the approved supplier list is current
  • [ ] Book any overdue pest inspection, equipment service or probe calibration
  • [ ] Review the last audit report and confirm every finding has been closed, with evidence

One to two weeks out

  • [ ] Run an internal audit against your own program and record the results
  • [ ] Look through temperature logs for gaps, repeated readings and missing signatures
  • [ ] Match every out-of-range reading to a corrective action
  • [ ] Check cleaning schedules for weekends, public holidays and night shifts
  • [ ] Confirm training records exist for every food handler on the roster, including casual and agency staff

On the day

  • [ ] Have the program, records and previous audit report ready to hand over
  • [ ] Make sure the person on shift knows where everything is kept
  • [ ] Let the auditor see the kitchen working normally, rather than staged

How digital records make audit preparation easier

Paper can pass an audit. The difficulty is the work it takes to keep it complete, and the time it takes to gather it when the auditor arrives. Digital records change both. Readings are captured as the work happens, each entry is timed and signed, and the records for a month or a whole site can be pulled up in minutes rather than collected from folders. We look at the wider case for moving off paper in our article on paperless food safety in aged care.

Before you retire paper forms, confirm with your auditor or local council what they will accept. Requirements differ between states and councils.

How iMonitor Australia supports audit preparation

iMonitor Australia is HDS’s food safety software for aged care kitchens. It is set up from your existing food safety forms, so it supports the program you already run rather than replacing it.

  • Cold storage: WiFi sensors log fridge and freezer temperatures around the clock and alert your team when a reading stays outside safe limits for a set time, or when readings are missing or incorrect.
  • Meal temperatures: staff insert a Bluetooth probe into the core of the dish, check the reading and press one button, and the temperature goes straight into the form.
  • Corrective actions: a missing or incorrect record prompts a corrective action, with a follow-up date and a reminder when it falls due.
  • Signed records: every staff member signs under their own login, and a food safety supervisor signs off the day’s records under theirs.
  • Internal audits and receiving: internal audits, compliance checks and incoming goods records are completed on a tablet and stored with the rest of your food safety records.
  • Audit day: records can be downloaded as PDFs to print, save or email, and auditors can log in to view the reports they need.

This article is general information for aged care providers and is not a substitute for advice from your food safety auditor, local council or state food authority.

Get ready for your next audit

If audit preparation in your kitchens still means days of chasing paper, our team can walk you through iMonitor Australia with your own forms, sites and auditor’s expectations in mind. You can book a personalised demo, or see how HDS supports aged care providers.

Written by

HDS Team

Book a Personalised Demo for Your Organisation

Our team will take you through HDS with your sites, menus and workflows in mind, and answer any questions your organisation has along the way.

Request a Personalised Demo

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
Let us know which solutions you would like to see and how your sites currently operate.